EFR32BG29 Series 2 Bluetooth® Wireless SoC

Coming Soon

The EFR32BG29 wireless SoC is a highly efficient, high memory, low-power, and ultra compact SoC designed for secure and high performance wireless networking for IoT devices. It features 1 MB Flash and 256 kB RAM, DCDC Boost to support multiple battery chemistries and allow operation down to 1.2 V, and a Coulomb counter for accurate battery level monitoring. It is also designed for Secure Vault™ High that provides advanced security features, making it ideal for applications and sectors that have rigorous and stringent security and privacy standards. Some applications include battery powered sensors, asset trackers, tooth implants, CGMS, and wearables.

Efr32bg29 BD
Supports Bluetooth 5.4 & Proprietary
Ideal for high-end battery-powered IoT devices

EFR32BG29 Common Specs

Low Power Wireless System-on-Chip

  • High-performance 32-bit 76.8 MHz ARM Cortex®-M33 with DSP instruction and floating-point unit for efficient signal processing
  • Up to 1 MB flash program memory
  • Up to 256 kB RAM data memory
  • 2.4 GHz radio operation

Radio Performance

  • -106.8 dBm sensitivity @ 125 kbps GFSK
  • -99 dBm sensitivity @ 1 Mbit/s GFSK
  • -96.1 dBm sensitivity @ 2 Mbit/s GFSK
  • TX power up to +8 dBm

Low System Energy Consumption

  • 3.6 mA RX current (1 Mbps GFSK)
  • 4 mA TX current @ 0 dBm output power
  • 9 mA TX current @ 6 dBm output power
  • 11 mA TX current @ 8 dBm output power
  • 30 μA/MHz in Active Mode (EM0) at 76.8 MHz
  • 3.4 μA EM2 DeepSleep current (256 kB RAM retention and RTC running from LFXO)
  • 1.5 μA EM2 DeepSleep current (16 kB RAM retention and RTC running from LFXO)
  • 0.16 μA EM4 current

Wide Selection of MCU Peripherals

  • 16-bit Analog to Digital Converter (IADC)
  • Analog Comparator (ACMP)
  • Up to 26 General Purpose I/O pins with output state retention and asynchronous interrupts
  • 8 Channel DMA Controller
  • 12 Channel Peripheral Reflex System (PRS)
  • 3 × 16-bit Timer/Counter with 3 Compare/Capture/PWM channels
  • 2 × 32-bit Timer/Counter with 3 Compare/Capture/PWM channels
  • 32-bit Real Time Counter
  • 24-bit Low Energy Timer for waveform generation
  • 1 × Watchdog Timer
  • 2 × Universal Synchronous/Asynchronous Receiver/Transmitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S
  • 2 × Enhanced Universal Asynchronous Receiver/Transmitter (EUSART)
  • 2 × I2C interface with SMBus support
  • Digital microphone interface (PDM)
  • Precision Low-Frequency RC Oscillator to replace 32 kHz sleep crystal
  • RFSENSE with selective OOK mode
  • Die temperature sensor with +/- 1.5 °C accuracy after single-point calibration
  • Coulomb counter integrated into DC-DC

Supported Modulation Format

  • 2 (G)FSK with fully configurable shaping
  • OQPSK DSSS
  • (G)MSK

Protocol Support

  • Bluetooth Low Energy
  • Proprietary

Wide Operation Range

  • Devices with Buck DC-DC
    • 1.8 V to 3.8 V supply range
    • -40 °C to 125 °C
  • Devices with Boost DC-DC
    • 1.2 V to 1.7 V supply range
    • -20 °C to 55 °C

Packages

  • QFN40 5 mm × 5 mm × 0.85 mm
  • WLCSP45 2.6 mm x 2.8 mm x 0.5 mm

 

BG29 Security Features

Find the Right EFR32BG9 Device 3 Select Columns
Select Columns

Sort A -> Z
Sort Z -> A

Filter by values...

Close
Loading Results
Close