Low Power Wireless System-on-Chip

• High Performance 32-bit 78 MHz ARM Cortex®-M33 with DSP instruction and floating-point unit for efficient signal processing
• Up to 1024 kB flash program memory
• Up to 256 kB RAM data memory
• Sub-GHz radio operation with TX power up to +20 dBm
• 2.4 GHz BLE radio operation with TX power up to +10 dBm
• Matrix Vector Processor for AI/ML acceleration

Low Energy Consumption

• 4.4 mA RX current at 920 MHz (400 kbps 4-FSK)
• 4.0 mA RX current at 915 MHz (4.8 kbps O-QPSK)
• 5.4 mA RX current at 915 MHz (2 Mbps GFSK)
• 3.9 mA RX current at 868 MHz (2.4 kbps GFSK)
• 3.9 mA RX current at 868 MHz (38.4 kbps FSK)
• 4.2 mA RX current at 433 MHz (100 kbps 2GFSK)
• 5.2 mA RX current at 2.4 GHz, 1 Mbps BLE
• 25.7 mA TX current @ 14 dBm output power at 915 MHz (14 dBm part number)
• 81.8 mA TX current @ 20 dBm output power at 915 MHz with (20 dBm part number)
• 12.3 mA TX current @ 0 dBm output power, 2.4 GHz
• 23.2 mA TX current @ 10 dBm output power, 2.4 GHz
• 33 μA/MHz in Active Mode (EM0) at 39.0 MHz
• 2.8 μA EM2 DeepSleep current (256 kB RAM retention and RTC running from LFXO)
• 1.3 μA EM2 DeepSleep current (16 kB RAM retention and RTC running from LFRCO)
• Preamble Sense Mode (PSM) low duty-cycle listen

High Receiver Performance

• -98.1 dBm sensitivity @ 400 kbps 920 MHz 4-GFSK
• -124.8 dBm sensitivity @ 4.8 kbps 915 MHz O-QPSK
• -96.0 dBm sensitivity @ 2 Mbps 915 MHz GFSK
• -124.1 dBm sensitivity @ 2.4 kbps 868 MHz GFSK
• -110.4 dBm sensitivity @ 38.4 kbps 868 MHz FSK
• -110.6 dBm sensitivity @ 100 kbps 433 MHz 2GFSK

Wide Selection of MCU peripherals

• Analog to Digital Converter (ADC)
  • 12-bit @ 1 Msps
  • 16-bit @ 76.9 ksps
• 2 × Analog Comparator (ACMP)
• 2-Channel Digital to Analog Converter (VDAC)
• Low-Energy Sensor Interface (LESENSE)
• Up to 49 General Purpose I/O pins with output state retention and asynchronous interrupts
• 8 Channel DMA Controller
• 12 Channel Peripheral Reflex System (PRS)
• 4 × 16-bit Timer/Counter with 3 Compare/Capture/PWM channels
• 1 × 32-bit Timer/Counter with 3 Compare/Capture/PWM channels
• 32-bit Real Time Counter
• 24-bit Low Energy Timer for waveform generation
• 16-bit Pulse Counter with asynchronous operation (PCNT) Newer Addition
  
• 2 × Watchdog Timer
• 3 × Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART)
  
• 1 x Universal Synchronous/Asynchronous Receiver/Transmitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S)
• 2 x I2C interface with SMBus support
  
• Integrated Low-Energy LCD Controller supporting up to 192 segments
• Keypad scanner supporting up to 6 x 8 matrix (KEYSCAN)
  
• Die temperature sensor with ± 2 °C accuracy across temperature range

Supported Modulation Format

• 2/4 (G)FSK with fully configurable shaping
  
• OQPSK with DSSS
• (G)MSK
• OOK

Protocol Support

• Proprietary
• CONNECT
• Amazon Sidewalk
• WM-BUS
• Wi-SUN
• Bluetooth Low Energy

Wide Operating Range

• 1.71 to 3.8 V single power supply
• -40 °C to +125 °C

Packages

• QFN68 8 mm x 8 mm x 0.85 mm
• QFN48 6 mm x 6 mm x 0.85 mm

Secure Vault

• Hardware Cryptographic Acceleration for AES128/192/256, ChaCha20-Poly1305, SHA-1, SHA-2/256/384/512, ECDSA, +ECDH (P-192, P-256, P-384, P-521), Ed25519 and Curve25519, J-PAKE, PBKDF2
• True Random Number Generator (TRNG) 
• ARM® TrustZone®
• Secure Boot with Root of Trust and Secure Loader (RTSL)
• Secure Debug Unlock
• DPA Countermeasures
• Secure Key Management with PUF
• Anti-Tamper
• Secure Attestation